| Subject | Text |
| rewinding MOT not working out..... | hi again,
well it is the same with my analog meter, about .5 volts with 10 turns. the resistance |
| Is this normal appearance for and amplifier IC?? | I'm in uncharted territory (for me, anyway). I'm a radio tech--and don't find much in a CB I can't |
|
|
| MOV | Looks like a Metal Oxide Varistor or MOV device to me too.
These are usually near the powersupply |
| switch check | at first check the power source is 110 or 220 v, if OK make sure power is off and set the VOM to buz |
| no horiz. investel tv | 110 v is normal .transistor bu 808 is ok.i scope signal is normal when disconnecting output of stv22 |
| Take the value of the resistor - add 10% and subtract 10%. If the value you read falls within this r |
| schema elettrico | Salve a tutti il televisore segnalato come in username avendo diversi difetti vorrei potervi porre r |
| The conversion of Amps to Watts is governed by the equation Watts = Amps x Volts
For example 1 am |
| Re: need code please | [quote:97aedc0f9f="imtiazrwd16"]MERCEDES-BENZ
BECKER AUTOMOTIVE
MODEL NO.BE 6053
SERIAL NO.682054 |
| CD startup | Hi, exact sequence with a CD is as follows. Power up, Splash screen on video. Open command. Open a |
| JVC TV AV-21FMG3B , Excessive Voltage On HOT & burn the | I have a JVC Tv MOdel , AV-21FMG3B, there is an excessive voltage ( 180V) on the collector of HOT &a |
| re; toshibas | Hey guys, your english is great as far as I`m concerned, One thing
I forgot to mention is the color |
| You can get the STK392 110 at electronix on line for 6.00 bucks a piece. |
| 2000 | yes 220 is good and 110 v good too no switching involved |
| onkyo tx-8211 | change the main voltage from 110 to 220 for USA model |
| Frank, What is your mains voltage in your country ? ( 110, 220 ?)
If you put 220 Volts on a 120 |
| Re: eprom dump supra stv28p10 | [quote="mazmaz"]tv name: supra
tv model: ST28p10
Chassis name: 11ak19p5 (printed on rig |
|
|
| power adaptor | Check what data you have available from the blown 110 Volts adaptor. (NAMEPLATE)
Do you know the se |
| [quote:4df324e2a6="jts1957"]Take the value of the resistor - add 10% and subtract 10%. If the value |
| It comes back as a BN44-00161A assuming it's a version SK01 $110 list. |
| 120V adapter | Wow you went for a nice burn-out when you connected a 120 Volt adapter to the 220 Volt supply.
Wh |
| Re: NEED FOR CODE PLEAS. | [quote:0a7caa9124="bkhtr"]BLAUPUNKT-WERKE GMBH
MADE IN MALAYSIA
BP0110 3 4720898
LUXEMBOURG C30
|
| The Toshiba TV repair 32C3035D | The problem is due to 2 inverter boards, one of which goes faulty. The cost of the 2 boards as a pai |
| rewinding MOT not working out..... | hello,
i'm wondering why my voltages are not up to par on a welder project i am building. i remove |
| Monitor Gateway 2000 | Have a Monitor,Gateway 2000 model CPD15F23,Vivitron15,manufactured by Sony.
I dont know if this mo |
| Some problems with old TV | Hello all, I have an old TV (model "Tesla Color 110 ST"), which still works okay, but rece |
| Burned Out Sub Woofer Repairs? | Hello all,
I've got a problem I was hoping someone would be able to help me with. I bought a Har |
| Re: Is this normal appearance for and amplifier IC?? | [quote:adc219a936="dan newberry"]I'm in uncharted territory (for me, anyway). I'm a radio tech--and |
| Got these from highland electrix
11AK19 PIC TOO WIDE D611(BY299P/BY399)L604(2R4)15MH(TPAR2599 SEME) |
| Before getting too far ahead & jumping the gun, check the model number as the HSS2000 that you |